TPT486

3.3V & 5.0V Full Duplex RS-485 Transceivers

Data Sheet
Buy on DigiKey
Request a sample

Overview
Development Resources
Application
Ordering Detail

Overview

The TPT486/488 is IEC61000 ESD protected, which support ±12 kV IEC contact and ±15 kV IEC air discharge. 3.0V ~ 5.5V transceivers that meet the RS-485 and RS-422 standards for Full Duplex communication.

Transmitters in this family deliver exceptional differential output voltages into the RS-485 required 54Ω load. The devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters.

Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus.

The TPT486/488 is designed for full-duplex RS485, and support SOP14, SOP8 and DFN3X3-8 package, which is characterized from –40°C to 125°C.

Status

Production
Rating

Industrial
Drivers Per Package

1
Receivers Per Package

1
VCC (Min) (V)

3
VCC (Max) (V)

5.5
Data Rate (Max) (kBPS)

500
ICC (Max) (mA)

2.5
ESD HBM (kV)

20
IEC-61000-4-2 Contact (kV)

15
Operating Temperature Range (℃)

-40 to +125
Package

SOP14

Development Resources

Documentation

Show Filter

Hidden Filter
Documentation
- Data Sheet
- Selection Guide
- Application Note
- Technical Note
- User Guide
- Test Report
- Document Name
- Type
- Language
- Date
- Datasheet_TPT486-TPT488
  
  Data Sheet
  
  English
  
  02/02/2024
  
  3.3V & 5.0V Full Duplex RS-485 Transceivers
- Introduction to Latch-up and the Preventive Measures
  
  Technical Note
  
  English
  
  01/19/2024
- Automatic Correction Scheme of RS-485 Communication Bus Cross-Wire Fault
  
  Technical Note
  
  English
  
  01/19/2024
- Application Tips on ESD-EOS
  
  Technical Note
  
  English
  
  01/19/2024
- 3PEAK Analog Products Selection Guide
  
  Selection Guide
  
  English
  
  01/19/2024