TPT4089

3.3V~5.0V Full Duplex RS-485 Transceivers with polarity control

Data Sheet
Buy on DigiKey

Overview
Development Resources
Application
Ordering Detail

Overview

The TPT4089 is IEC61000 ESD protected, 5V transceivers that meet the RS-485 and RS-422 standards for Half and Full Duplex communication.

The TPT4089 features a fail-safe receiver, which support the output of the receiver to be logic high when the differential input (bus pin A/B) of the receiver is open, short or idle when RXP=0V.

Transmitters in this family deliver exceptional differential output voltages into the RS-485 required 54Ω load. The 10Mbps devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. The TPT48x is characterized from –40°C to 125°C.

Status

Production
Rating

Industrial
Drivers Per Package

1
Receivers Per Package

1
VCC (Min) (V)

3
VCC (Max) (V)

5.5
Data Rate (Max) (kBPS)

500 or 20000
ICC (Max) (mA)

2.5
ESD HBM (kV)

18
IEC-61000-4-2 Contact (kV)

15
Operating Temperature Range (℃)

-40 to +125
Package

SOP14

Development Resources

Documentation

Show Filter

Hidden Filter
Documentation
- Data Sheet
- Selection Guide
- Application Note
- Technical Note
- User Guide
- Test Report
- Document Name
- Type
- Language
- Date
- Datasheet_TPT4089
  
  Data Sheet
  
  English
  
  02/02/2024
  
  3.3V~5.0V Full Duplex RS-485 Transceivers with polarity control
- Introduction to Latch-up and the Preventive Measures
  
  Technical Note
  
  English
  
  01/19/2024
- Automatic Correction Scheme of RS-485 Communication Bus Cross-Wire Fault
  
  Technical Note
  
  English
  
  01/19/2024
- Application Tips on ESD-EOS
  
  Technical Note
  
  English
  
  01/19/2024
- 3PEAK Analog Products Selection Guide
  
  Selection Guide
  
  English
  
  01/19/2024