TPT9H111

Multipoint-LVDS Line Driver and Receiver

Data Sheet
Buy on DigiKey
Request a sample

Overview
Development Resources
Application
Ordering Detail

Overview

The TPT9H111 is a 3.3V Multipoint-Low-Voltage Differential (M-LVDS) line driver and receiver, which can support 100 Mbps data rates. Driver outputs and receiver inputs are protected against ±8kV ESD strikes without latch-up. The driver output has been designed to support multipoint buses with the loads no less than 30 Ω, and can support the controlled slew rate on drivers.

The TPT9H111 is Type-1 receiver that detects the bus state with a differential input of 50 mV over a common-mode voltage range of -1 V to 3.4 V. The receivers exhibit 25 mV of differential input voltage hysteresis to prevent output oscillations with slowly changing signals or loss of input. The device is characterized for operation from –40°C to 85°C. The device is available as half-duplex in an 8-lead SOP package.

Status

Production
Rating

Industrial
Drivers Per Package

1
Receivers Per Package

1
VCC (Min) (V)

3
VCC (Max) (V)

3.6
Data Rate (Max) (kBPS)

100000
ICC (Max) (mA)

24
ESD HBM (kV)

8
IEC-61000-4-2 Contact (kV)

Yes
Operating Temperature Range (℃)

-40 to +85
Package

SOP8

Development Resources

Documentation

Show Filter

Hidden Filter
Documentation
- Data Sheet
- Selection Guide
- Application Note
- Technical Note
- User Guide
- Test Report
- Document Name
- Type
- Language
- Date
- Datasheet_TPT9H111
  
  Data Sheet
  
  English
  
  02/02/2024
  
  Multipoint-LVDS Line Driver and Receiver
- Introduction to Latch-up and the Preventive Measures
  
  Technical Note
  
  English
  
  01/19/2024
- Application Tips on ESD-EOS
  
  Technical Note
  
  English
  
  01/19/2024
- 3PEAK Analog Products Selection Guide
  
  Selection Guide
  
  English
  
  01/19/2024