TPM16050

17V H-Bridge Driver for IR-CUT

Data Sheet
Buy on DigiKey
Request a sample

Overview
Development Resources
Application
Ordering Detail

Overview

The TPM16050 is a high-voltage H-bridge driver dedicated for IR-CUT control in surveillance camera. It is optimized to control the IR-CUT with 20Ω impedance and 3.3V, 5V or 12V supply voltage. It can provide up-to 0.5-A drive current. TPM16050 can sustain max 17V supply voltage.

It also supports an external 26.9Ω/2.5W resistor in serial of supply pin VM, in order to protect low-voltage loads such as IR- CUT from voltage over-stress with 12V supply.

Internal protection features such as overcurrent protection, short circuit protection undervoltage lockout and over temperature improve reliability of the whole system.

Status

Production
Rating

Industrial
VIN (V)

3~17
Rdson (H+L) (Ω)

0.85
Max Output Current (A)

0.5
# of Half Bridges

2
Temperature Range (℃)

-40 to +125
Package

SOT23-6

Development Resources

Documentation

Show Filter

Hidden Filter
Documentation
- Data Sheet
- Selection Guide
- Application Note
- Technical Note
- User Guide
- Test Report
- Document Name
- Type
- Language
- Date
- Datasheet_TPM16050
  
  Data Sheet
  
  English
  
  02/02/2024
  
  17V H-Bridge Driver for IR-CUT
- Introduction to Latch-up and the Preventive Measures
  
  Technical Note
  
  English
  
  01/19/2024
- Application Tips on ESD-EOS
  
  Technical Note
  
  English
  
  01/19/2024
- 3PEAK Analog Products Selection Guide
  
  Selection Guide
  
  English
  
  01/19/2024